An ISO 9001-2000

 


An ISO 9001-2000 Certified Company
Flexible Hose Assemblies
PPI LOW PRESSURE HOSES are manufactured from Nitrile based extruded synthetic rubber tube resistant to oils, gasoline, fuel oil, air, water, hydraulic and petroleum based oils, grease, mineral oil etc., In accordance with SAE-DIN-BS and BIS specification.

         
Main Characteristics  
Hardness - 705 shore A
Tensile Strength min. - 70 Kg/Cm
Elongation at break - 300% min.
Tension set - 15%
Operating temperature - 0C to 100 C
   
TYPE OF HOSES        
PLW   G.I. Wire braided tube for regular pressure and tough handling. Available in sizes for 1/8" I.D. to 3" I.D    
PLCW   One layer of cotton braid, covered outside with G.I. wire braiding for additional pressure. Available in sizes from 1/8" I.D. to 3" I.D..    
         
   
 
ID INCH 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"
ID MM 6.4 8 9.5 12.7 16 19 25.4 31.8 38 50.8
   
   
PLW-GI WIRE BRAIDED FLEXIBLE PIPES
Working Pressure 40 35 30 25 20 18 15 12 10 10
Test Pressure 80 70 60 50 40 36 30 24 20 20
BEND RADIUS 25 30 40 45 50 70 90 110 150 180
FOR LOW PRESSURE APPLICATION
PLSS SS WIRE BRAIDED FLEXIBLE PIPES Working Pressure 45 40 35 30 25 20 17 15 12 11
Test Pressure 90 80 70 60 50 40 34 30 24 22
BEND RADIUS 25 30 40 45 50 70 90 110 150 180
FOR LOW PRESSURE APPLICATION
   
         
 
  Home   |   What We Offer   |   Contact Us   |   Enquiry Powered by
 
Copyright ©2018 CEE DEE INDUSTRIES BHOPAL